| Info |
|---|
This page describes the performance of different passive components with the voltage regulators on Sulu and Spock PCBs. |
| Table of Contents |
|---|
Introduction
The Spock and Sulu PCBs have voltage regulators so that a 3 V battery can power SCuM, which takes up to 2 V. The voltage regulators have been noisier and less efficient than expected.
Component selection
Friendly name | Model number | Designator | Notes | Datasheet |
spock 10 uF cap | GRJ155R60J106ME11D | C_1.1_IN1, C_1.1_OUT1, C_1.8_IN2 , C_1.8_OUT2 | ||
old 10 uF cap | CL05A106MP8NUB8 | C_1.1_IN1, C_1.8_IN2 | ||
new 10 uF cap | GRM155R60J106ME15D | C_1.1_IN1, C_1.1_OUT1, C_1.8_IN2 , C_1.8_OUT2 | Recommended on datasheet | |
100 uF cap | GRM21BR60E107ME15L | C_1.1_OUT1, C_1.8_OUT2 | ||
old inductor | MLZ1005M2R2WT000 | L1, L2 | ||
new inductor | 74438343022 | L1, L2 | Recommended on datasheet | |
1.1V DC-DC | S-85S1AB11-I6T1U | U3 | https://www.ablic.com/en/doc/datasheet/switching_regulator/S85S1A_E.pdf | |
1.8V DC-DC | S-85S1AB18-I6T1U | U2 | https://www.ablic.com/en/doc/datasheet/switching_regulator/S85S1A_E.pdf |
Note that the 1.1V DC-DC converters were missing so 1.0V DC-DC converters were used as a substitute.
Boards
Friendly name | Designator | Board | L1, L2 | C_1.x_INy | C_1.x_OUTy | VBAT converter | VDDD converter |
Recommended components | DC1 | Sulu v1.0 | 74438343022 | GRM155R60J106ME15D | GRM155R60J106ME15D | S-85S1AB18-I6T1U | S-85S1AB10-I6T1U |
Spock components | DC2 | Sulu v1.0 | MLZ1005M2R2WT000 | GRJ155R60J106ME11D | GRJ155R60J106ME11D | S-85S1AB18-I6T1U | S-85S1AB10-I6T1U |
L6/L7 | Sulu v1.0 | MLZ1005M2R2WT000 | CL05A106MP8NUB8 | GRM21BR60E107ME15L | S-85S1AB18-I6T1U | S-85S1AB11-I6T1U |
Figures
...
Waveforms
DC1
...
DC2
...
L6
...
I-V measurements
Board | Friendly name | V_ext (V) | R_load (k Ohm) | R_ext (k Ohm) | I_ext (mA) | V_bat (V) | I_bat (mA) |
|---|---|---|---|---|---|---|---|
DC1 | Recommended components | 3 | 11.94 | 0 | 1.389 | 1.791 | 0.1506 |
DC1 | Recommended components | 3 | 5.25 | 0 | 1.502 | 1.765 | 0.3365 |
DC1 | Recommended components | 3 | 1.194 | 0 | 2.304 | 1.783 | 1.494 |
DC2 | Spock components | 3 | 11.94 | 0 | 1.781 | 1.799 | 0.1509 |
DC2 | Spock components | 3 | 5.25 | 0 | 1.951 | 1.8 | 0.3431 |
DC2 | Spock components | 3 | 1.194 | 0 | 2.95 | 1.779 | 1.483 |
L6 | 3 | 11.94 | 0 | 1.88 | 1.757 | 0.147 | |
L6 | 3 | 5.25 | 0 | 2.1 | 1.821 | 0.347 | |
L6 | 3 | 1.194 | 0 | 3.15 | 1.814 | 1.52 |
...