...
View file | ||
---|---|---|
|
View file | ||
---|---|---|
|
Frequency Sweep when LC divider is on or off
Setup
Using the same code running for Frequency Sweep experiment above but under conditions when LC divider is turned on and turned off.
Experiment
The experiment runs one time for channel 11, 18 and 26 respectively
Result
Frequency Sweep (SCuM → OpenMote)
6 histogram figures (one figure per channel), where:
Y: frequency offset (read value of FREQEST register)
X: frequency settings (from 22.00.00 to 29.31.31)
Divider off
...
Divider on
...
Divider off
...
Divider on
...
Divider off
...
Divider on
...
Frequency Sweep (SCuM ← OpenMote)
6 histogram figures (one figure per channel), where:
Y: number of pkt received
X: frequency settings (from 22.00.00 to 29.31.31)
Divider off
...
Divider on
...
Divider off
...
Divider on
...
Divider off
...
Divider on
...
Raw data
View file | ||
---|---|---|
|
View file | ||
---|---|---|
|
Serial output data
The zip file contains the serial output from OpenMote, and SCuM during conducting the frequency sweep tests. The raw data provided above are derived from those serial output and formatted in JSON through scripts. So you should not required to use those serial output information data. Just stored here in case.
...