...

1. Said Alvarado-Marin

2. Thomas Watteyne

3. Timothy Claeys

4. Austin Patel

5. Andrew Fearing

6. Jackson Paddock

7. David Burnett

8. Kristofer PISTER

9. Martina Balbi

10. Joshua Alexander

11. Fil Maksimovic

Minutes

• Jackson Paddock

  • TODOworking code

  • where will be using?

  • <I’m missing the context entirely, please fill in? (Thomas Watteyne )

• Austin Patel

  • nRF integration discussion

  • big board and small board pin interface if different

    • small board: voltage sources

    • big board: only

  • discussion about using P4 for connecting to the McCoy

    • 4x bus for the 3-wire bus

    • VDDD

    • VBAT

    • VDDIO

    • GND

  • keep the tap feature

  • would recommend doing chip-on-board for large board

    • shipped board to Quik-Pak, waiting for response

  • bad radio performance on big board with rubber ducky on SMA

    • bad radio performance

    • strange, if you are getting -60 dBm, no reason for bit corruption

    • Fil Maksimovic : same calibration → yes

    • Kristofer PISTER disable all of the switching regulators and drive with clean external supply to VBAT and VDDIO?

      • Joshua Alexander yes

    • Kristofer PISTER susceptibility on noise on supply at certain frequency

    • Joshua Alexander you can using the pins for the current measurement

    • Austin Patel this needs to work before sending to Quik-Pak

    • discussion about changes to layout

    • goal is to get both boards out by 28 Apr 2021

    • board review on 26 Apr 2021 or 27 Apr 2021

  • Kristofer PISTER what

  • Thomas Watteyne to confirm UART pins can be mapped to any pins