Table of Contents |
---|
Present
malisha
Joe
Jackson
Minutes
- issue solved with interrupt handling
had to run slow IMU updates
probably has to do with interrupt handling
looked at integrating lighthouse code, Tengfei Chang ‘s quickcal code didn’t seem to work but using exotic board which might be the reason
doesn’t work: not seeing any packet being TX’ed by SCuM
Brian Kilberg to send more info and pics to Tengfei Chang
inside frequency sweep RX, some function doesn’t work
in IF estimate of a packet
are motes alive?
you could try the 2-wire bus to load the code
there is a pin which tells SCuM whether to boot from 2-wire bus or optical. Should be documented somewhere.
Berkeley team to send more hardware
smaller motes?
Brian Kilberg to sync with Fil Maksimovic
QuickCal paper ARTF, waiting for input from Brad Wheeler and Fil Maksimovic
channel hopping demonstrated
update the bootloading through RF