Info |
---|
Please create a new row if your project(s) exist(s) on a separate fork! |
Info |
---|
Notice Note that these are SCuM software codes codebases are under development. Once the work is done, the code should be merge merged into the develop branch of repothe repository: https://github.com/PisterLab/scum-test-code. |
Name | Branches (and functionality/notes for each) | Github Repository Link |
Main PisterLab repository | |
TODOCurrently the code on this branch is out of date. Reference the develop branch for the latest code changes |
|
) Expand |
---|
|
- Main changes in applications/freq_sweep_rx_tx
(802.15.4 tx/rx)
- Additions to make LC frequency sweeping easier (fixed Tx/Rx mode or sweep range)
- Support for manual optical calibration settings
- Low-power mode support (reduced clock speed before radio operation for use with solar panel power- Temperature-based LC compensation and temperature estimation (32kHz and 2MHz clock ratio approach)
- Code support for MEMS device actuation on SARA board with Zappy solar panel (zappy2.c)
- Acknowledgement support after packet received
https://github.com/PisterLab/scum-test-code |
Titan’s repository | Expand |
---|
title | titan/ble and titan/scum |
---|
| - Random data and plots in scum |
Expand |
---|
title | titan/ble_temp_sweep |
---|
| - Support optical LC frequency calibration - Enables temperature calibration using the 32kHz and 2MHz clock ratio - Transmit BLE packets while tuning the LO frequency using the temperature estimate |
Expand |
---|
| - Main changes in applications/ble_tx_154_rx , applications/ble_tx_154_rx_track_if , and applications/ble_tx_154_rx_track_mean - Allows SCuM to receive 802.15.4 packets and re-broadcast the contents as a BLE packet - Uses the 802.15.4 RX IF frequency (applications/ble_tx_154_rx_track_if ) or the fine codes of received 802.15.4 packets (applications/ble_tx_154_rx_track_mean ) to tune the BLE TX frequency - PR: https://github.com/PisterLab/scum-test-code/pull/20 |
| https://github.com/tryuan99/scum-test-code |
Tengfei’s repository | | https://github.com/changtengfei/scum-test-code |