...
Sensor paper accepted! (which one?)
update on the hornet battery testing
presents a battery with two conductive plastic stick on both side, it’s hard to tap on to the battery.
Conduct current test with 4 different load resistors to the battery
The voltage and current measure does not match, need to be checked
Able to get SCuM to transmit frame with the battery, OpenMote received it. (USB is connected to get UART, need to check if that affects the voltage , see following)
Jackson Paddock SCuM is powered through VBAT, when the USB is connected, does the VDDIO will affect the voltage of SCuM used?
Kristofer PISTER is that possible to have the battery holder as part of the PCB?
Thomas Watteyne are we going to use a chip antenna or just a wire-bonded antenna?
we need new SCuM dev boards! several SCuM dev boards are not working.
Tengfei Chang update on the SCuM
have the SCuM sending BLE iBeacon and received on Phone
working on demostrate AoA working on nRF5340 chips
Thomas Watteyne go through the idea of tracking hornet using the BLE AoA.
Thomas Watteyne update on the laser cutting course and idea of dot bot.
update on the hornet news, glue on the front rather than the back.
...