Attendees

@David Burnett
@Joshua Alexander
@Fil Maksimovic
@Tengfei Chang
@Kristofer PISTER
@Austin Patel
@Thomas Watteyne
@Andrew Fearing
@Alex Moreno

Minutes

@Fil Maksimovic
- traveling to Berkeley tomorrow
- 2/3 boards boot optically, GPIOs and UARTs appear to work
- 0/3 boot over 3wb. GPIOs that should replicate 3wb signals do not replicate input signal patterns
- boot_source_select() is set correctly
- @Tengfei Chang 's board test still pending
- @Joshua Alexander indicates L37 was one of the 5 Sulu boards that we thought didn't work, but completely swapping out the jumpers used made it suddenly behave as expected. It did still have a noticeably lower current than expected even after swapping those out. Maybe there is some sort of issue rooted in there? I know, on my end, it worked consistently for hours in a row.
- merge of the code is 99% done, intimidating to press the merge button, will be nice to merge that into the develop branch. @Austin Patel can help with setting up a Pull Request and have 1-2 people review. @Tengfei Chang offers to review PR once created.
Portland
- Able to run SCM3C power simulations but must use IC version greater than 6.1.5
  - 6.1.7 should not be used due to strange disappearing via behavior observed and other issues with other designs
- Starting to tabulate simulation-appropriate drive and load for correct setup at https://docs.google.com/spreadsheets/d/1ItQG5zL0X3Ym7JV20NmK857yvM6fV7uZha9RrxTSoSE/edit#gid=0
Summary of issues with printf() seems like a good thing to prepare
@Austin Patel
- helped Charles getting up and running with SCuM, board fully working, indicated how to add files
@Andrew Fearing
- discussion about getting the ADC to get working
- @David Burnett on a student’s desk to get that working again
- @Kristofer PISTER expected accuracy? 0-0.5V? looking forward to hearing from student