Project Code

Please create a new row if your project(s) exist(s) on a separate fork!

Name	Branches (and functionality/notes for each)	Github Repository Link
Main PisterLab repository	master TODO develop - Quick Cal implementation https://github.com/PisterLab/scum-test-code/tree/develop/scm_v3c/applications/quick_cal (source code on SCuM) https://github.com/openwsn-berkeley/openwsn-fw/blob/develop/projects/common/01bsp_quick_cal (source code on OpenMote) austin - Main changes in `applications/freq_sweep_rx_tx` (802.15.4 tx/rx) - Additions to make LC frequency sweeping easier (fixed Tx/Rx mode or sweep range) - Support for manual optical calibration settings - Low-power mode support (reduced clock speed before radio operation) for use with solar panel power - Temperature-based LC compensation and temperature estimation (32kHz and 2MHz clock ratio approach) - Code support for MEMS device actuation on SARA board with Zappy solar panel (zappy2.c) - Acknowledgement support after packet received	https://github.com/PisterLab/scum-test-code
Titan’s repository	titan/ble and titan/scum - Random data and plots in `scum` titan/ble_temp_sweep - Support optical LC frequency calibration - Enables temperature calibration using the 32kHz and 2MHz clock ratio - Transmit BLE packets while tuning the LO frequency using the temperature estimate titan/SW-19 - Main changes in `applications/ble_tx` and `ble.c` - Enables custom BLE packet assembly and transmission titan/SW-23 - Main changes in `applications/ble_tx_154_rx`, `applications/ble_tx_154_rx_track_if`, and `applications/ble_tx_154_rx_track_mean` - Allows SCuM to receive 802.15.4 packets and re-broadcast the contents as a BLE packet - Uses the 802.15.4 RX IF frequency (`applications/ble_tx_154_rx_track_if`) or the fine codes of received 802.15.4 packets (`applications/ble_tx_154_rx_track_mean`) to tune the BLE TX frequency	https://github.com/tryuan99/scum-test-code
Tengfei’s repository	changtengfei/SW-26 - Continuously calibration for 2MHz RC OSC frequency and the LC OSC frequency of both TX and RX - PR: https://github.com/PisterLab/scum-test-code/pull/22 changtengfei/SW-25 - Continuously calibration for LC RX frequency using IF estimate - PR: https://github.com/PisterLab/scum-test-code/pull/21	https://github.com/changtengfei/scum-test-code