• Your instructor will start two application of the SmartMeshSDK on their computer:

  • JsonServer connects to the SmartMesh IP manager

  • HiveMqConnector which connects to the MQTT broker and publishes information it gets from the SmartMesh network onto topic aiotacademy

• On your computer, start Node-RED (command “node-red”) and open its interface at http://127.0.0.1:1880/

• Create the following Node-RED flow
  

  

You will need the following parameters to configure your nodes:

• Once all set, don’t forget to deploy your flow

• What do you receive in your debug window?