was able to read the temperature sensor from SCuM
the communication is to be done to send to OpenMote
@Tengfei Chang repeat the frequency sweep Tx test on channel 11 and printed out the RSSI value of received frame.
The result shows the received frames set around coarse 23 have -41 to -45 dbm RSSI and other frames received around coarse 11 have -80 to -100 dbm RSSI
An other experiment is conducted:
The result shows, some frames are received on channel 14 - 20, but 0 frames received on channel 11 and 13.
Code organization will be completed after adding an ASC profile interface in scm3c_hw_interface.c file.
Will ping @Lydia Lee when it’s ready
New 20 chips test
6 = works without VDDD/VBAT tap
12 = works with VDDD/VBAT tap ->planned for QuickPak
2 = I couldn’t get them to program
get scum to transmit through BLE
Working on the Rx of the BLE