...
Action Items
Notes
update from Yu-Chi Lin
discussion about
GPIO12
(stays low)pin used as data out from SCuM to ADS board
David Burnett issue seen can be explained by a number of things, but not something that can easily be fixed
discussion about order of connecting things to get firmware to run
SCuM gets signal from ADS board!
update from Fil Maksimovic
shows join procedure working!
discussion about SCuM-to-SCuM communication: often, the second SCuM produces an end-to-frame event without a start-of-frame event, which causes it to fail. Does not happen when SCuM received from the OpenMote
update from Alex Moreno