...
- Andrew Fearing to get a quote from Gold Phoenix
- Austin Patel and Jackson Paddock to go in the lab to test the small boards, including UART
- Kristofer PISTER and/or David Burnett and/or Fil Maksimovic to review the design of the large board with Joshua Alexander .
Minutes
small board
Austin Patel and Jackson Paddock will be going in the lab to test the small boards
we need to rev the small board with a connector for the antenna, so thus assembly is just test fundamentals
rev the board, given the specifics, costs close to $1k
Fil Maksimovic : you could use https://www.goldphoenixpcb.com/
Austin Patel to update notes
will use optical first, then 3-wire bus with Teensy, then maybe 3-wire bus with nRF
Andrew Fearing to get a quote from Gold Phoenix
Kristofer PISTER we should review the board review from Joshua Alexander ?
Carol
would like to use small board for smart bandage project
can I get a small board?
Austin Patel can build a second board
discussion about reuse the HornetSlayer PCB for the band-aid. MEng team could use it.
Alex Moreno we have rigid board for Hornet as well (on top of the flex PCBs). Plenty of board to test with.
Kristofer PISTER maybe we could use a couple of Hornet Boards
Alex Moreno VBAT, GND, antenna trace
Kristofer PISTER : what happened to board from Fil Maksimovic
Fil Maksimovic : have design files. Only problem is the contact with the battery holder. Has been solved since?
Andrew Fearing the XL on the small board is the the Invensense ICM-20948
discussion about regulator
Should test UART as well when testing small board.