...
playing with FPGA (https://tinyfpga.com/, ICE40LP8K)
discussion about
got a larger board made
believe Austin Patel was wire-bonding
sent a couple of links
discussing DC833M, https://www.fanstel.com/bc833
did some wirebonding
may have understood why wirebonding wasn’t attaching to SCuM pads
wirebonded VDD/VBAT/GND, was able to connect headers, seeing 300uA from SCuM, which is good. Could also connect Teensy but something wrong with connection, e.g. VDDD (no voltage on the pin)
David Burnett discussion about Teensy and multimeter woud allow Joshua Alexander to test out boards
Jackson Paddock can assemble a new large board
Joshua Alexander to order a Teensy and multimeter or Analog Discovery to test board
Austin Patel about McCoy, wirebonded, but when trying to connect VBAT and GND, something was shorting
Andrew Fearing thinks he has the equipment to get a board tested
Austin Patel can hand off a board to Andrew Fearing
discussion about temp profile of the reflow oven
Alex Moreno helped assemble the small board
DotBot 1.3 built (see below)
exploration completes! https://github.com/openwsn-berkeley/Atlas/tree/develop
...