Production
Board/Chip | VDDD Startup (mV) | Cold Boot? | Custodian | 16 GPIOs | UART Tx/Rx |
Q1 | 870 | yes | Brian | yes | yes |
Q2 | 904 | yes | Alex | yes | yes |
Q3 | 905 | yes | Thomas | yes | yes |
Q4 | 857 | yes | Titan | yes | yes |
Q5 | 867 | yes | Meera | yes | yes |
Q6 | 858 | yes | Jove | yes | yes |
Q7 | 890 | yes | Fil | yes | yes |
Q8 | 865 | yes | Thomas | yes | yes |
Q9 | 845 | yes | Meera | yes | yes |
Development
Board/Chip | Status/Notes |
1 | not booting |
2 | not booting |
3 | not booting |
4 | not functional, sharpie over epoxy |
5 | UART troubles |
6 | not epoxied |
7 | |
8 | not epoxied |
9 | not epoxied |
10 | |
11 | strange, non-deterministic behavior. ex: running the same code that repeatedly prints over uart, the output would appear in the terminal apparently at random intervals, which varied over time and across programming iterations |
12 | not epoxied. was bonded to attempt to see difference in lighthouse performance without epoxy. never got it to successfully program |
13 | not epoxied. was bonded to attempt to see difference in lighthouse performance without epoxy. never got it to successfully program |
14 | "acts mad weird but also works" -Fil |