Attendees

1. Andrew Fearing

2. Thomas Watteyne

3. Jackson Paddock

4. Said Alvarado-Marin

5. David Burnett

6. Kristofer PISTER

7. Fil Maksimovic

8. Joshua Alexander

9. Austin Patel

10. Razanne Abu-Aisheh

Minutes

• Fil Maksimovic

  • playing with FPGA (https://tinyfpga.com/, ICE40LP8K)

  • discussion about

• Jackson Paddock

  • got a larger board made

  • believe Austin Patel was wire-bonding

• Andrew Fearing

  • sent a couple of links

• Thomas Watteyne

  • discussing DC833M, https://www.fanstel.com/bc833

• Austin Patel

  • did some wirebonding

  • may have understood why wirebonding wasn’t attaching to SCuM pads

  • wirebonded VDD/VBAT/GND, was able to connect headers, seeing 300uA from SCuM, which is good. Could also connect Teensy but something wrong with connection, e.g. VDDD (no voltage on the pin)

  • David Burnett discussion about Teensy and multimeter woud allow Joshua Alexander to test out boards

  • Jackson Paddock can assemble a new large board

  • Joshua Alexander to order a Teensy and multimeter or Analog Discovery to test board

  • Austin Patel about McCoy, wirebonded, but when trying to connect VBAT and GND, something was shorting

  • Andrew Fearing thinks he has the equipment to get a board tested

  • Austin Patel can hand off a board to Andrew Fearing . Just board with headers (Kristofer PISTER confirms no SCuM)

  • discussion about temp profile of the reflow oven

  • Alex Moreno helped assemble the small board

• Said Alvarado-Marin

  • DotBot 1.3 built (see below)

• Razanne Abu-Aisheh

  • exploration completes! https://github.com/openwsn-berkeley/Atlas/tree/develop