Attendees
Action Items
- Thomas Watteyne to coordinate with Tengfei Chang about what test code has been written for SCuM
- Austin Patel to discuss board design of large board with Joshua Alexander
- Fil Maksimovic and Austin Patel to coordinate about IMU data
Minutes
shares diagram on trying to 3wb bootloading, using Teensy and level shifter breadboard
David Burnett asks for code that will exercise the GPIOs
Kristofer PISTER what test code has Tengfei Chang built?
Austin Patel shares his test code: https://github.com/austinapatel/scum-test-code/blob/austin/scm_v3c/AllGPIOToggle.bin (include all-GPIO toggle, 2mA current)
Alex Moreno suggests monitoring current draw of the board
Alex Moreno indicates need to leave
VDDD
connected during optical calibrationFil Maksimovic indicates we don’t have a 3wb calibration, asked Mark whether could work on that using nRF.
discussion about why UART active lowers power consumption
Austin Patel board error
discussion about VDDD connection missing on large board
discovered pads are shorted on large board
David Burnett looking at layout, probably confirming VDDD net is not connected to the VDDD pad on SCuM
Austin Patel McCoy update
good radio performance
tested GPIO toggle, UART and radio
IMU testing missing
no hard reset on board, means can’t do 3wb. Had to use optical programming
discussion about hard and soft reset