1. @Jackson Paddock

  2. @Thomas Watteyne

  3. @Said Alvarado-Marin

  4. @Timothy Claeys

  5. @David Burnett

  6. @Kristofer PISTER

  7. @Razanne Abu-Aisheh

  8. @Austin Patel

  9. @Andrew Fearing

  10. @Fil Maksimovic

  11. @Alex Moreno

Action Items

@Thomas Watteyne to coordinate with @Tengfei Chang about what test code has been written for SCuM
@Austin Patel to discuss board design of large board with @Joshua Alexander
@Fil Maksimovic and @Austin Patel to coordinate about IMU data


  • @David Burnett

    • shares diagram on trying to 3wb bootloading, using Teensy and level shifter breadboard

    • @David Burnett asks for code that will exercise the GPIOs

    • @Kristofer PISTER what test code has @Tengfei Chang built?

    • @Austin Patel shares his test code: https://github.com/austinapatel/scum-test-code/blob/austin/scm_v3c/AllGPIOToggle.bin (include all-GPIO toggle, 2mA current)

    • @Alex Moreno suggests monitoring current draw of the board

    • @Alex Moreno indicates need to leave VDDD connected during optical calibration

    • @Fil Maksimovic indicates we don’t have a 3wb calibration, asked Mark whether could work on that using nRF.

    • discussion about why UART active lowers power consumption

  • @Austin Patel board error

    • discussion about VDDD connection missing on large board

    • discovered pads are shorted on large board

    • @David Burnett looking at layout, probably confirming VDDD net is not connected to the VDDD pad on SCuM

  • @Austin Patel McCoy update

    • good radio performance

    • tested GPIO toggle, UART and radio

    • IMU testing missing

    • no hard reset on board, means can’t do 3wb. Had to use optical programming

    • discussion about hard and soft reset

  • update by @Razanne Abu-Aisheh and @Timothy Claeys for next week

  • @Said Alvarado-Marin presents update about DotBot

  • @Fil Maksimovic

    • meeting with Andreia

    • open toolchain for FPGA

    • working on small antennas