07-Oct-2019
Attending
@Jove Yuan
@Lydia Lee
@Kristofer PISTER
@Titan Yuan
Raymond?
@Felipe Campos
@Ahad Rauf
Brian Kilberg
@Thomas Watteyne [remote]
@Tengfei Chang [remote]
Action Items
Minutes
@Tengfei Chang
gives an update on the software workflow
@Thomas Watteyne
upload your pic to your profile
getting page contents programmatically
@Lydia Lee
getting rid of ASC magic number
discussion about #define vs enum vs variables
@Jove Yuan
optical programmer upgrade
random spikes on the programmer
mote isn’t receiving everything, something isn’t been received, debugging
performance depends on the chip, may be because reflections in the package
@Kristofer PISTER : right path forward? can we get a visible light LED with a broad enough spectrum and that is fast enough (1MHz?)
@Kristofer PISTER : good ideas, send to Jove
@Kristofer PISTER : try out the different angles
@Kristofer PISTER : do we have a circuit explanation why we can program, but not calibrate?
limitation of the analog discovery to capture the SFD (??)
Jove to talk to Kris
@Titan Yuan
SCuM to OpenMote calibration
looking at OpenMote serial port ()
length
coarse
mid
fine (0..31)
RSSI
many lost packets, valid RSSI
is SCuM sending the wrong packet contents with the right CRC?
@Kristofer PISTER : make sure to explain detail
01bsp_radiop_rx is what is running on OpenMote
Scum sends million packets to OpenMote only couple of packets is received
@Kristofer PISTER : please check whether you are checking CRC
BLE:
couldn’t get BLE to work on Q4
Raymond?
BLE transmitting
looking at beacon apps. Formats: Apple has iBeacon, Android has Eddystone which includes telemetry data. THere are Android/iPhone apps that display this.
@Kristofer PISTER : please do a presentation on apps which do things with BLE beacons; find what to do on SCuM to send data to those apps
let’s demonstrate the world’s smallest compatible beacon
@Felipe Campos
SCuM with interrupts, not using Brad’s polling code, instead use capture registers (see Sahar's code)
will lowering timing errors (lighthouse, etc)
lots of problems from UART
@Ahad Rauf
SCuM current testing
the high current chips where due to ASC settings (ldo’s, ADC, etc were on)
solution was to onto change certain bits in the ASC
weird: if changing the ASC setting from setting1 to setting2 doesn’t change the current. You need to power cycle the mote when going from setting1 to setting2.
enabling/disabling on-chip LDO
when unprogrammed, switches between 250uA and 350uA
Brian
looking at debouncing the lighthouse signals
processor speed used? 20 MHz?
cool demo on 3D localization with lighthouses on SCuM
Admin
can projecting computer also join the meeting and share screen?
encourage people to create accounts on crystalfree.org (and upload pictures)
Â